Introduction:
This component is a 9/16" high‑pressure tube designed for waterjet cutting systems. It is used to convey ultra‑high‑pressure water or abrasive slurry from the pump to the cutting head, maintaining pressure integrity throughout the fluid delivery path.

Applications:
Used in high‑pressure waterjet cutting equipment for both pure‑water and abrasive‑jet operations. Installed as rigid or flexible piping between the intensifier pump, filter assemblies, swivel joints, and the cutting nozzle.

Features:

• Rated for continuous operation at extreme pressures typical of waterjet systems.

• Precision‑drawn or seamless construction for uniform wall thickness and high fatigue resistance.

• Corrosion‑resistant material compatible with water and abrasive media.

• Standard 9/16" fitting size for easy integration with common waterjet connections.

• Smooth internal surface to minimize pressure loss and turbulence.

Maintenance:

• Regularly inspect the tube surface for signs of wear, pitting, or external damage.

• Check fittings and end connections for leakage or thread deformation.

• Replace tubes that show any cracking, bulging, or pressure‑test failure.

• Follow recommended replacement intervals based on operating hours and pressure cycles.

• Not field‑repairable; damaged tubes must be replaced with new ones.